Re: [apops] using NTP/etc to measure n/w latency?
- To: Neale Banks <neale at lowendale dot com dot au>
- Subject: Re: [apops] using NTP/etc to measure n/w latency?
- From: "Robert B. Cohen" <bcohen at bway dot net>
- Date: Tue, 24 Oct 2000 19:33:49 -0400
- Cc: "Henk Uijterwaal (RIPE-NCC)" <henk at ripe dot net>, apops at lists dot apnic dot net, Philip Smith <pfs at cisco dot com>
- References: <Pine.LNX.email@example.com>
- Sender: firstname.lastname@example.org
YES, it's the SNMP angle! Could the RIPE box use SNMP to measure traffic volumes. That is my motivation. I would like to see the measures of bandwidth volumes directly so we could see exactly how much traffic is moving, but also some correlations with QOS and traffic volumes. Part of the motivation is I would like to see how much of certain circuits is actually filled and how the fill percent is changing. There is some anecdotal evidence to suggest that while there is more bandwidth getting put in place, the fill rates are a bit lower than they have been in the past. Bob Cohen Neale Banks wrote: > On Tue, 24 Oct 2000, Robert B. Cohen wrote: > > > Is there any way to measure traffic volumes on specific circuits with > > this, not just delays? > > What/how are you hoping to measure that can't be better/easier measured > with the likes of router interface octet counters etc? > > Ah...... if the RIPE box could use SNMP to measure traffic volumes then > there might be some interesting correlations to be observed. Is that your > motivation? > > Regards, > Neale. * APOPS: Asia Pacific Operations Forum * * To unsubscribe: send "unsubscribe" to apops-request at apnic dot net *